Ampeg VENTURE VB-212 4 OHM Basový reprobox

Ampeg VENTURE VB-212 4 OHM — Lightweight 2x12 Bass Cabinet with Pro-Grade Power

The Ampeg VENTURE VB-212 4 OHM is a 500-watt, 4-ohm bass speaker cabinet engineered for the modern gigging bassist who refuses to choose between Ampeg's legendary tone and a manageable load-in. Two custom-voiced 12" Lavoce neodymium woofers pair with a variable high-frequency driver to reproduce the warm, tubby low end and modern top-end definition that have defined the Ampeg sound for over six decades. At only 18.1 kg, this front-ported enclosure is one of the lightest 2x12 bass cabs available, finished in carbon fiber-style Tolex with a modern Ampeg "clamshell" logo for a stage-ready look that holds up gig after gig. The VB-212 4 Ohm is the right choice for bassists who want maximum power output from a single-cab setup paired with any Venture Series head.

What Makes This Cabinet Stand Out in the Venture Lineup

Built around Lavoce neodymium woofers — a driver platform Ampeg chose specifically for the Venture Series to cut weight without sacrificing punch — the VB-212 delivers what reviewers describe as "thundering low-end depth" alongside a "modern-sounding sheen" on the top end. A 3-position High-Frequency Attenuator switch lets players dial the compression driver between -6 dB, 0 dB, or fully bypassed, so the cab adapts to slap, fingerstyle, pick, or aggressive overdriven tones. Two Neutrik speakON / 1/4" combination jacks accept both speakON NL2/NL4 connectors and standard 1/4" TS cables, with either jack serving as a thru-out to chain a second cabinet for larger stages.

Power & Headroom — 500 W RMS Bass Cabinet

Power handling is the single most important number for a bass cab on a loud stage, and the VB-212 4 Ohm is rated to take a real beating. With 500 watts RMS and 1000 watts Program power on tap, it pairs cleanly with the Venture V3, V7, or V12 head in a single-cab setup, and the 4-ohm rating is specifically intended to deliver maximum output from that pairing. The 101 dB sensitivity rating means the cab converts amplifier power into acoustic output efficiently, so players get volume and chest-thumping low end without having to push the head into clipping.

• Power Handling: 500 W RMS / 1000 W Program @ 4 Ω — real-world headroom for full-volume gigs
• Sensitivity: 101 dB — efficient conversion of amp power into on-stage volume

Drivers & Cabinet Construction — Lavoce Neodymium in a Front-Ported Enclosure

The driver complement is where the VB-212 separates itself from older Ampeg cabs. Two 12" custom-voiced Lavoce neodymium woofers handle the low and low-mid frequencies, while a variable high-frequency compression driver covers the top-end articulation that lets a bass cut through a dense mix. Neodymium magnets slash the weight compared to traditional ceramic-magnet designs, which is why this 2x12 lands at just 18.1 kg. The front-ported cabinet design extends low-frequency response and helps the cab "feel" larger than its footprint suggests on stage.

• Woofer Configuration: 2x 12" custom-voiced Lavoce neodymium — modern punch with classic Ampeg warmth
• High-Frequency Driver: Variable HF compression driver with 3-position attenuator (-6 dB / 0 dB / Off) — tune the top end to the room and the playing style
• Cabinet Design: Front-ported enclosure — extended low-end response and a bigger on-stage "feel"

Portability, Connectivity & Build Quality — Built for the Road

Gigging bassists care as much about weight and durability as they do about tone, and the VB-212 is built to disappear into the load-in. At 18.1 kg it is light enough for one trip from the car, and the carbon fiber-style Tolex covering shrugs off the scuffs and scrapes of regular gigging. Dual Neutrik speakON / 1/4" combination jacks give players a choice between locking speakON connections for permanent installs and standard 1/4" cables for quick setups, with a thru-out on the second jack for adding another cab down the line. An optional Portaflex-style grille assembly offers a vintage aesthetic alternative, and an optional padded cover protects the investment during transport.

• Weight: 18.1 kg — one-trip load-in for working bassists
• Inputs: 2x Neutrik speakON / 1/4" combo jacks with thru-out — flexible, secure, low-noise speaker connection
• Covering: Carbon fiber-style Tolex with modern Ampeg "clamshell" logo — gig-proof finish with a stage-ready look

Who Is the Ampeg VENTURE VB-212 4 OHM For?

The Ampeg VENTURE VB-212 4 OHM is the right choice for professional gigging bassists who need full Ampeg tone and 500 watts of headroom in a cabinet they can actually carry to the venue without a dolly. It suits players running a single-cab rig with a Venture V3, V7, or V12 head who want maximum power transfer from a 4-ohm load, and it works equally well as part of a multi-cab stack using the thru-out jack. Touring players, weekend cover-band bassists, and studio session players who value the warm Ampeg low end and modern Lavoce-driven clarity will all find a home for this cab. The 3-position HF attenuator also makes it a strong fit for bassists who switch between slap, fingerstyle, and pick techniques within a single set.

Ampeg — Six Decades of Bass Amplification

Ampeg has been building bass amplification for over 60 years, and the brand's name is practically synonymous with the sound of the electric bass guitar — from the legendary SVT stack to the modern Venture Series. The Venture line was designed specifically for today's gigging bassists, combining compact, easily controlled stage setups with the professional tone and reliability FOH engineers already trust worldwide. The VB-212 4 Ohm continues that legacy by pairing Ampeg's heritage voicing with the weight savings of Lavoce neodymium drivers, giving players a 2x12 cab that sounds like a classic Ampeg and carries like a modern one.